Custom Tooling

Name

Company

Phone

Country

Select the country where you are based for the correct member of our team will contact you.

Have you had this design made by us before?

Please let us know if we have made this set of tooling for you before. If we have then you can select yes and enter the previous order number to reorder.

Request number

Tooling type

If you are unsure what type of tooling you are currently using please see our tooling guide. If you are still unsure please feel free to get in touch with our support team.

Tooling size

Please select tooling shape shape if applicable

Unit of measurement

Select your prefered unit of measurement

Punch material

Select the punch material

Tooling coating

We can provide different coating types for your punches. If this is a requirement please select the required coating.

Bellows or oil cups

Oil cups prevent oil and other debris from the turret contaminating your products.

Bellows or oil cups

Oil cups prevent oil and other debris from the turret contaminating your products.

Tablet shape

Please select a shape for your tooling. If you can’t find what you are looking for please select “Other” and our sales will be in contact to discuss your requirements.

Tablet dimensions

DIM 1
DIM 2
DIM 3
DIM 4
DIM 5

Please note that depending on the material being compressed, tablets can expand slightly after being ejected from a tablet press. This can cause the tablet to be up to 100 microns larger than the dimensions of the tooling.

Multi tip tooling

Oil cups prevent oil and other debris from the turret contaminating your products.

Tablet coating

Please let us know if you will be coating your tablets as part of your production process. It is important for us to know this as this will affect how we design your tooling.

Face profile

Please select the face profile required.

Image logo/text

Land size (mm)

Our reccomended minimum land sizes: 0.05mm for radius less than 5mm, 0.1mm for radius between 5-10mm and 0.2mm for radius larger than 0.2mm

Margin (mm)

The margin is the distance from the edge of your text or logo to the edge of your tablet. Some of the face profiles limit how close we are able to get the image but if you have an idea of how much of a margin you would like please enter it here.

Breaker lines

Image logo/text

Land size (mm)

Our reccomended minimum land sizes: 0.05mm for radius less than 5mm, 0.1mm for radius between 5-10mm and 0.2mm for radius larger than 0.2mm

Margin (mm)

Breaker lines

Do you require the dies to be Carbide lined?

Die taper shape

Please select whether or not you would like your die to be tapered. Adding taper to a die can help minimize capping or damage of your tablets when they are ejected. The increased space at the opening of the die allows air to escape faster and creates a gentler decompression of the tablet during ejection. Single taper is most commonly used in micro tablets or in development of new tablets.

Number of sets

A full set is an upper punch, a lower punch, and a die. Please select how many sets required. We always recommend to get one extra set. E.g. if you have a 41 station tablet press to order 42 sets.

Notes

Have you spoken with a sales person?